In this video you will learn how to replace side indicator of a motorcycle. First of all you need to unscrew the screw in the bottom or back side of the indicator, then hold the glass cover and gently pull out . Depending upon your motorcycle indicator either the glass comes off or the hold unit , if just glass comes out then simply replace the bull .
But if the whole unit comes out then remove the screws which hold the bulb holder then take out the bulb from the hold and check it which type of bull is it , the straight pin one or the cross pin one then get the perfect replacement and insert the new indicator bulb in . After that place back the bulb holder to the reflecting assembly and tight the screws.
Then place the glass cover along with the reflector assembly into the indicator frame and tight the screws.
TOOLS AND OTHER THINGS USED
- SCREWDRIVER - [ Ссылка ]
- NEW BULB - 10 Rs
MY GADGET AND YOUTUBE EQUIPMENT'S
- MOBILE - GALAXY GRAND 2
- TRIPOD - [ Ссылка ]
- LOW BUDGET TRIPOD - [ Ссылка ]
- MOBILE HOLDER - [ Ссылка ]
- BEST MICROPHONE - [ Ссылка ]
- ANOTHER GOOD MIC - [ Ссылка ]
- LOW BUDGET MIC - [ Ссылка ]
- TRIPOD WITH MOBILE HOLDER AND MIC COMBO - [ Ссылка ]
TOOLS THAT I USE
- 1/4" SOCKET SET - [ Ссылка ]
- 1/2" SOCKET SET - [ Ссылка ]
- SPANNER SET - [ Ссылка ]
- [ Ссылка ]
- LONG HANDLE T-SPANNER SET - [ Ссылка ]
- [ Ссылка ]
- SCREWDRIVER SET - [ Ссылка ]
for small works - [ Ссылка ]
- PLASTIC HAMMER - [ Ссылка ]
- PLIERS - [ Ссылка ]
- SNAP RING PLIERS SET - [ Ссылка ]
- ALLEN KEY SET - [ Ссылка ]
HOPE THIS VIDEO IS HELPFUL FOR YOU
THANK YOU FOR WATCHING
MORE VIDEOS
Side stand warning light wiring and working - [ Ссылка ]
Side indicator wiring & working of any motorcycle/scooter - [ Ссылка ]
How to repair fuel level gauge of any motorcycle - [ Ссылка ]
How to repair kill switch of motorcycle - [ Ссылка ]
Full wiring of self motor of motorcycle - [ Ссылка ]
