Buy Now!
New Engine Knock Sensor from 1AAuto.com [ Ссылка ]

This video shows you how to install a new knock sensor in your 2004-2009 Audi A4 Quattro 2.0L I4. A knock sensor monitors your vehicle’s engine for unusual pulsations caused by things such as engine knock. If a sensor is damaged or malfunctioning, the engine may run poorly, inefficiently, or only in a low speed safe mode, and may also trigger diagnostic codes.

This repair was done on a 2007 Audi A4 Quattro Base 2.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2004 Audi A4 Quattro
2005 Audi A4 Quattro
2006 Audi A4 Quattro
2007 Audi A4 Quattro
2008 Audi A4 Quattro
2009 Audi A4 Quattro

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Phillips Head Screwdriver [ Ссылка ]
• 10mm Wrench [ Ссылка ]
• 17mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• 13mm Socket [ Ссылка ]
• Hose Clamp Pliers [ Ссылка ]
• Side Cutters
• T30 Socket
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Silicone Paste
• Drain Pan
• Pick [ Ссылка ]

Subscribe: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть