This trick I discovered when I remove the sprocket and when I put it back the slack was uneven so I tried it and it works perfectly. Make sure to mark the sprocket and the corresponding area on the hub so that every time you remove the sprocket you can find where to bolt on correctly. This is applicable to all motorcycles

This what I discovered: There are sprockets that are not perfect circle like this one. the sprocket is 2mm wider on the other side and the hub is 2 mm wider on the other side. When they are put together it is 2mm + 2mm = 4mm on the other side that causes the uneven slack. But if installed on the other way to each other it would be 2mm- 2mm =0mm that is why it became perfect circle. Does it make sense?

#chainslack #adjustment #bikechain

свернуть