Here we go again, time for HandHeldGaming to take a low cost handheld PC and stick a big NVMe in it. This time we are taking the Air+ 1215 all the way from 128gb to 2TB (Plus the existing 1TB Micro SD for a total of 3TB of storage)

Will I butcher the case? Will I break the triggers? Will the speakers still work? Will the whole unit die? You'll need to watch the video to find out. Its a long one, but a realistic timescale if you wish to carry out a similar process on your i3 powered Aya Neo Air+

**** Now confirmed as a good baseline guide for Mendocino based model **** Several Members/discord users have confirmed they used this guide when tearing down their Mendo unit (and they also confirmed they didn't break any speakers in the process).


Join this channel to get access to perks:
[ Ссылка ]


CHAPTERS:
00:00 Intro
00:37 Backup recommendation
00:58 Removing case bottom screws
03:00 Removing trim/LT/RT and screws from top of case.
04:06 Removing Triggers 😱
07:56 Opening the shell
14:00 Disconnecting the battery
14:26 Removing the Fan
17:10 Removing the PCB-A
18:37 Removing internal trim panel to gain access to NVME Drive
20:50 Removing the 128gb NVME and replacing with 2tb
23:15 Refitting the internal trim panel.
24:12 Re-locating "that" rubber bit that falls out for everyone.
29:05 Refitting the PCB-A
30:30 Refitting the Fan
32:15 Reconnecting the Power
33:06 Powering on with new 2tb fitted
35:00 Closing up the shell
37:31 Refittin the screws
40:20 Refitting the Triggers
44:35 Booting into BIOS to Check NVME

свернуть