Hello everyone, welcome back to the channel!
In this video, I will be carrying out a repair of the fabled stator magnets on the SV1000. This issue is found on most of the big Suzuki V-Twins however including the TL1000, SV 1000 and DL1000 - V STROM.
The fault with the magnets on the SV stator are widely documented and the fix is simply to re-glue them and apply JB Weld or similar to ensure that they can never move again!
It is not a difficult task but if you want to do it properly then removal of the stator from the crank is your best bet.
The tool that I used to remove the rotor from the crank can be found at the link below
[ Ссылка ]
The Loctite that I used in the video can be found at the link below
[ Ссылка ]
The JB Weld that I used for my repair can be found at the link below
[ Ссылка ]
An alternative that I mentioned is the Steel Stick Putty which can be found at the link below
[ Ссылка ]
The generator cover gasket can be found at the link below
[ Ссылка ]
For those that asked, a slave cylinder rebuild kit can be found at the link below, a video on this rebuild will be following very soon!
[ Ссылка ]
All links to products are affiliate links for which I will receive a small commission on any purchase made, at no additional cost to you.
I hope that you enjoyed this video.
Don't forget to like subscribe and comment for future content from Kev's Shed!
If you wish to offer support to my channel and enable me to continue to bring you quality content then please check out my Patreon page at the following link - [ Ссылка ] - Thank you.
Join me on the socials at the following links
Kev's Shed on Facebook - [ Ссылка ]
Kev's Shed on Instagram - [ Ссылка ]
Kev's Shed on Twitter - [ Ссылка ]
