In this video I show you 10 of my favourite DIY hacks, tips and tricks. These are just some of the tips I've picked up over the last few years. Ideal for beginners or maybe even some more experienced DIYers.

Free Linear Cut List Optimiser: [ Ссылка ]
Free Sheet Material Cut List Optimiser: [ Ссылка ]

MY FAVOURITE TOOLS & GEAR

Bargain Compressor - [ Ссылка ]
Cheap but actually surprising good Spray Gun (and kit) - [ Ссылка ]
Track saw [ Ссылка ]
Tracks [ Ссылка ]
Angle Grinder: [ Ссылка ]
'Dust Free' Sand Paper Discs: [ Ссылка ]
Dust Collection System:
Cyclone 🌀 [ Ссылка ]
Bucket 🪣 [ Ссылка ]
Shop Vac: [ Ссылка ]

For the best and cheapest licensed music check out [ Ссылка ]


⌚️Timestamps:
00:00 Introduction
00:17 1. Using a saw as a square
00:57 2. Measure from 100mm for accurate measurements
01:20 3. Use an envelope to catch drill dust
02:16 4. Turn the tape when measuring
02:47 5. Use Cut List Optimiser for all your cuts
04:00 Please Subscribe!
04:11 6. Keep razor blades handy
05:02 7. Check for square by measuring corner to corner
05:21 8. Get neater cuts
06:17 9. Use tape to mark measurements
06:47 10. Remove permanent marker
07:34 Leave your tips below
07:52 Outro

Some of the links in this description are affiliate links that may earn me affiliate payments. Any support for the channel is massively appreciated and allows me to keep making videos.

свернуть