- Determine whether you have a wide or narrow push button wiper arm by measuring it with a penny. A penny will fit snugly into the end of the wide 22mm wiper arm. It will not fit into the end of the narrow 19mm arm.
- Before installation, remove the plastic protector from the blade rubber.
- With this arm type, it is necessary to remove the pre-attached adaptor on the wiper blade, and replace it as follows, with adaptor “BC”.
- Identify the release tabs on the pre-attached adaptor.
- Using your index fingernails, pull both release tabs toward you.
- The pre-attached adaptor will tilt toward you and disengage from the blade. Discard it.
- Locate adaptor “BC” and position it so that the release tabs face up. Tilt adaptor “BC” back into the cavity in the blade until it “clicks” in place.
- Both release tabs must lock onto the blade before proceeding to the next step.
- Press the tab on the front of adaptor “B”.
- Lift shim “C” off of adaptor “B” and discard it.
- While keeping the adaptor parallel to the arm, hold your thumb on the front of the adaptor and pull the blade into the underside of the arm.
- The button on the top of the adaptor must lock into the hole in the top of the arm.
- Before use, be sure the wiper blade is locked onto the wiper arm.

For more information or further assistance, go to [ Ссылка ] and let us know how we can help!

свернуть