Part two of this series runs you through the install process. As you can see there is not much to it.
a few things to remember when performing this DIY:
*Never pull from the wires of any of the connectors.
*Make sure you alway check and insure you have the black connector
of the PCIII in the right orientation.
*Always listen for that CLICK sound when making your connections
*It doesn't matter what side you run the PCIII harness on. The right
side had more room for me cable wise and made connecting the
battery ground easier.
*Use a "RED" T-Tap and don't kill it when crimping it closed.
*The TPS signal wire color is PINK with a BLACK STRIPE.
All information about making on the fly adjustments using the 3 buttons on the front of the PCIII can be found on the downloads section of the power commander website.
**Buy the Chemist a Red Bull!**
Help keep the idea's flowing and the energy going so that the Chemist can put in those long hours in the lab to bring you another great DIY or product review. Use the link below to make small contribution to my Red Bull fund and receive a special shout-out on my next video.
PayPal
[ Ссылка ]
