After installing the Frontrunner RTT onto my Prinsu roof rack on my 5th GEN 4Runner I noticed the bolts were a bit long up front. In this video I quickly go through how I remove the RTT from the rack, shorten the bolts, and then reinstall the tent back onto the rack. If you have this style of roof rack you will know it is quite difficult to get your hand and a wrench in there to tighten everything down. By removing the cross bars of the roof rack I was able to bolt down the tent successfully. Basically what I did was measure where I wanted the tent and marked the cross bars with a sharpie pen. Removing the crossbars I was then able to layout the bars successfully (and evenly).

#frontrunner #rooftoptent #4runner

IG: @gary_babich

свернуть