Don’t you had it when the nailer jams? I’ve had very good success with the Dewalt 20 volt roofing nailer not jamming. I find the only time it has jammed in the past almost 3 years is if it can’t feed the nails. A few reasons the nails won’t feed are:
1. The end of the coil is bent in (like shown in the video)
2. If you load a coil that has been dropped or squished. If it’s not circular, the nailer will have trouble feeding the nails through
3. Wrong nails. I have seen a few people buy “siding nails” and try to use them for this nailer. Siding nails are a different gauge with a different head size and used for Hardie and other types of siding or fencing.

I hope this info is helpful. Some would say it’s common sense, but if you didn’t know, then it might not be to you. In case you’re wondering, the decking in this video was done well after the siding was done and I came back to patch that first row of siding in. There is an adapter tip on the nose of the nailer specifically designed for J-channel and corner posts from sidingtips.ca
.
.
.
.
.
.
.
.
.
.
.
.
#sidingrepairs #vinylsidingrepair #vinyljchannel #sidingadapter #sidingnailer #cordlesssidingnailer #sidinglife #vinyldecking #protip #protips #constructiontips #skilledtrades #tradesecrets #diy #residentialconstruction

свернуть