Buy Now!
New Control Arm with Ball Joint from 1AAuto.com [ Ссылка ]

This video shows you how to install a new front left lower control arm from TRQ on your 2017-2024 GMC Acadia. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This repair was done on a 2018 GMC Acadia Denali 3.6L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2017 GMC Acadia
2018 GMC Acadia
2019 GMC Acadia
2020 GMC Acadia
2021 GMC Acadia
2022 GMC Acadia
2023 GMC Acadia
2024 GMC Acadia

Tools you will need:
• Pry Bar [ Ссылка ]
• 18mm Wrench
• 18mm Socket
• 22mm Socket [ Ссылка ]
• 1/2 Inch Impact Gun [ Ссылка ]
• 3/8 Inch Impact Gun
• 1/2 Inch Breaker Bar [ Ссылка ]
• 3/8 Inch Breaker Bar
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Pole Jack
• Wheel Chocks

Subscribe: [ Ссылка ]

Check out our playlist:
GMC Acadia 2017-2022 2nd Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть