#install #Howto #Diyvideos
How to install a garage/shop heater. (Mounting, Venting, Wiring). This is our first video on this channel and we hope you enjoy it. We aim to make tis channel so regular people can accomplish their home improvement goals and projects. Here is the list of everything used for this project down below.

***TOOLS USED*** ***MATERIALS USED***
1. Sheetrock Jack 1. 5/8in Sheetrock
2. Impact Drill 2. 16 Gauge 2 1/2in Torx
3. Power Drill 3. 2, 3in Elbows
4. Miter Saw 4. 1, 3 ft, 3in Diameter venting
5. Jig Saw 5. 1, 3 ft 3in double wall vent
6. Utility Knife 6. 2, 3in Thimble
7. Tape measure 7. Foil tape
8. Speed Square 8. 3in Torx screws
9. Drill Bits 9. Sheet metal screws 3/8in
10. Torx Bits 10. Wire nuts
11. Hole saw 11. 3in Rain cap
12. Sawzall 12. 6ft pig tail
13. Wire Stripper 13. 1 8ft 2x6
14. Level 14. Self tapping sheet metal screw

***NOTE***
Need the motivation and patience to take on this project!
Good luck and I hope this video really helps.

свернуть