#Belzona1813 is a two-component paste grade lining designed to protect vertical and horizontal metal surfaces from #abrasiveattack; The system is ideally suited for application to: centrifuges, chutes and hoppers, deflector screens, mixing bowls, screw conveyors, pipe bends and wear plates.

One of the key factors of a Belzona application is a thorough mix of two-component composites.

In this video we demonstrate #howtomix Belzona 1813 by volume.

For the mixing, you will need two components (base and solidifier) of Belzona 1813, a Belzona working surface and two spatulas.

Each product package comes with a Manufacturer’s Instructions for Use.

First, remove the caps and protective seals and set them aside.

Measure 3 separate parts of Belzona 1813 Base and transfer them to the working surface. Place the seal and cap back onto the container to store for further use.

Using a clean spatula, measure 1 part of Belzona 1813 Solidifier and transfer it to the working surface. Place the seal and cap back onto the container to store for further use.

Mix both components together in a figure 8 motion to achieve a uniform material free of any streaks.

Once the mixed material turns into a uniform color with no streaks, it is ready for the planned application on:

- Fans
- Hoppers
- Pipe bends
- Screw conveyors
- And other equipment subject to abrasion attack

For more information about Belzona 1813, visit our website:
[ Ссылка ]

For other mixing videos, subscribe to Belzona TV YouTube Channel and watch this playlist:
[ Ссылка ]

свернуть