Do this at your own risk. This is a very long video.
After some additional troubleshooting, I found the problem of the juicer malfunction to be cold soldering on one of the legs of the speed control (potentiometer). It appears to be working OK after I resolder the joint. If you want to take apart the juicer, you can watch the video. I'll upload a follow up video to show where I made the repair. [ Ссылка ]
My friend's Breville Juicer BJE510XL stopped working with a flashing letter E on the function display panel. Most errors are related to the handle bar not locked on securely or the unit went into overload protection by tripping the thermal fuse on the motor. If the thermal fuse is your problem, you don't have to tear apart the juicer completely. Just disassemble the motor from the body to gain access to the fuse.
Barring any blown fuse or loose wiring connections or broken plastic parts, the failure can be traced to the damaged motor, or the control board. There is also a fuse on the control board you can check for continuity. If your screen lights up, the F1 fuse on the circuit board is probably good. You can also check the safety switch for continuity.
Getting to the circuit board is a problem as it involves removing the handle and associated parts. The video will show the process involved.
Before you proceed to go into the trouble of taking out the circuit board, you have to decide on whether you should replace the motor base unit or replace the circuit board. It turns out a used motor base unit on eBay is cheaper than the price of a new circuit board. It is a no brainer then just to buy the used motor base as they can be easily found on eBay for $35, or less. Your old motor base can then be used for spare parts. A new motor costs around $100 and a new circuit board around $50, including shipping. When new, the Breville juice fountain cost over $300.
Correction: At the end of the video, Ebay link Fuse rating for motor is for 15 amps. You should use 10 amp 250v thermal fuse for the juicer.
Click here to subscribe to this channel: [ Ссылка ]
Ещё видео!