The Makeblock xTool D1 10W laser engraver is a high-end, high quality laser engraver and laser cutter. It will not disappoint even the most demanding user. In this review video, I put the machine through the range of tests to see how well the xTool D1 engraves and cuts plywood, hardwood, acrylic and stainless steel. I have also tested its rotary roller attachment.
I compared its performance to Atomstack A10 Pro or the X7 Pro, Sculpfun S9, Neje Master 2S Plus.
This is a great machine to start a small business or a demanding hobby. Great for laser cutting, laser engraving and laser etching!

You can get the machine here: [ Ссылка ]
Use my coupon code "xToolJT" to get 10% off your order at xTool! Only for a limited amount of time and for a limited amount of orders!
Or buy here: [ Ссылка ] (coupon BGc2ae9c for the 430$ price!)

You can buy the xTool RA2 Pro rotary tool here: [ Ссылка ]
My review for the xTool RA2 Rotary chuck: [ Ссылка ]

The technical review of this machine, where you can find test results of other laser engravers too:
[ Ссылка ]

I tested the machine with a standard wood engraving pattern (power scale, interval test and photo engraving), a focus distance test, and plywood and hardwood cutting test. I also measured the focus spot size by engraving a test pattern on anodized aluminium and used a microscope to measure the beam size.
On this website you can find comparisons with standardized tests made on 10+ laser engravers.

BUY THROUGH THESE LINKS
(Affiliate links, I get a small commission at no extra cost to you. This enables me to get better coupons in the future so you have even lower price!):
**************************************************************************
xTool D1: [ Ссылка ]
Alternative store: [ Ссылка ]
Atomstack A10 Pro: [ Ссылка ]
Use coupon code BGbb8fe9 to get it for 589$!) Valid only until end of March and for a limited number of orders!
Sculpfun S9: [ Ссылка ] (Get it for 299$ with this coupons: BG115280 (discount is valid for a limited number of orders!)
Amazon: [ Ссылка ]
Aliexpress: [ Ссылка ]

USE PROPER LASER SAFETY GLASSES (O.D 6+):
[ Ссылка ] (you only have two eyes!)
******************

Lightburn setup tutorial for this machine:
[ Ссылка ]

I hope you enjoyed this video.
And click that LIKE button! It helps a lot!
BUT DO NOT CLICK THIS - [ Ссылка ]

Subscribe for more and tell me in the comments what you like the most or what should I create next.

Follow me on Facebook and Instagram
[ Ссылка ]
[ Ссылка ]
for spoilers on what I am currently working on, behind the scenes and other extras!

I get my music from here: [ Ссылка ]

#xTool #laserengraver #xToolD1

свернуть