This video shows the full assembly process (and a detailed review) of my 3D (RepRap style) FDM printer. The printer is a kit for a Kossel style delta 3D printer with many improvements including linear slides from the Chinese company Anycubic.
Contents:
00:01:10 Leaf through the manual
00:04:13 Unboxing and a short look at all parts
00:16:40 Extrusion unpacking and a warning about metal shavings
00:18:32 Wrong comment about top corners assembly
00:20:01 Correcting myself on the above
00:22:58 Comment on the bottom corners
00:26:17 Measuring precise assembly of the triangles
00:35:15 Hot end and printing head review
00:40:54 Diagonal rods. Explaining the need for spacers
00:49:16 Fixing the cartridges
00:53:05 Mounting the linear slides correctly
01:03:54 Fixing the end stop switches
01:07:15 Installing the belts and setting the length and tension. Spacers mod described. Mechanics assembly complete.
01:17:57 Choosing XYZ towers and controller board mounting location
01:21:06 Mounting the board - a small modification
01:24:31 I say the board mounting modification is not good but it worked in the end and I did use it
01:28:51 Cable connections and routing
01:30:59 First power on
01:36:50 Assembly and Repetier firmware porting complete. Starting calibration
01:42:36 Calibration
01:46:59 First print!
01:50:01 Summary of impressions. Second print
01:56:20 When the bed is not "sticky" enough :-)
01:59:57 3D Benchy printing
02:08:30 That’s all folks. "Свършиии"
This is the kit direct from the manufacturer:
[ Ссылка ]
My Repetier-Firmware configured for this printer:
[ Ссылка ]
Thanks to Stoyan Stefanov for the permission to use his nice music:
[ Ссылка ]
Ещё видео!