Making a blade from 1500 pieces of fish hooks. About removing the container: In some cases, I prefer not to remove the container. The container protects the valuable material and if there are cavities left, they will easily weld during the second welding. Before the second welding, I grind the container off the adjoining surfaces. The rest of the container with a thickness of 2 mm, during the first welding, lengthens four times, becomes 0.5 mm, but due to a decrease in the cross-section by 2.5 times, the thickness is 1.25 mm of which some thickness burns out. In the second welding, with an elongation of four times, the thickness is 0.31 mm, with an increase in width of 1.75 times, the thickness of the container is 0.18 mm, and some part burns out. In my experience, there is almost no container until the end of forging.
Tea: linked tea "Love at first sight".
[ Ссылка ]

On my patreon page, I began to explain the processes and secrets of my work. Topics already covered:
1. Why do I add pepper to container Damascus steel.
2. What do I sprinkle? Flux and its composition.
3. How do I remove the container from the workpiece (container Damascus steel).
4. Why am I drilling a hole in a container.
5. Why do I sweep away the dross from the anvil with my hand.
6. Why do I first forge some blanks on a tree.
7. In what and why do I soak the blank before forging.
8. In which granules do I place the workpiece after forging.
9. What kind of white powder do I pour into the container.
Channel Support: [ Ссылка ]
My site: [ Ссылка ]
Check merch to help support the channel:
[ Ссылка ]

#DamascusSteel

свернуть