All 13 infill patterns available on Cura in 2021.
Each Infill took approximately 1 hour to print.
Layer Height: 0.2mm
Infill: 15%
Printer: Ender 3 V2
Filament: 1.75mm Red PLA

Shoutout to Matt in the comments for asking about which print used the least filament.
Filament length used according to Octoprint and converted to grams using 2.89g/m
(Measured Value in Brackets)
Listed in the order that they appear in the video:
Cross: 3.64m ➡️ 10.85g (9.7g)
Cross 3D: 3.29m➡️ 9.80g (8.6g)
Concentric: 3.56m➡️10.61g (9.3g)
Cubic: 4.05m➡️ 12.07g (10.5g)
Cubic Subdivision: 3.31m➡️ 9.86g (8.6g)
Grid: 4.08m➡️ 12.16g (10.6g)
Lines: 4.06m➡️ 12.10g (10.5g)
Gyroid: 4.12m➡️ 12.28g (10.8g)
Octet: 4.05m➡️ 12.07g (10.5g)
Triangles: 4.03m➡️ 12.01g (10.3g)
Tri-Hexagon: 4.06m➡️ 12.10g (10.6g)
Quarter Cubic: 4.05m➡️ 12.07g (10.5g)
Zig Zag: 4.48m➡️ 13.35g (11.6g)

I had assumed that with them all being calculated at 15% they would all be the same but that is not the case. Zig Zag used the most filament with 13.35g (11.6g) and Cross 3D used the least with 9.80g (8.6g). Zig Zag used 36% more filament using these settings.

Print Times:
Concentric Cube: 52:28
Cubic Subdivision: 57:23
Trihexagon: 1:00:12
Cubic: 1:01:56
ZigZag: 1:04:53
Quarter Cubic: 1:05:47
Grid: 1:06:29
Octet: 1:07:12
Lines: 1:07:40
Triangles: 1:08:22
3D Cross: 1:12:10
Gyroid: 1:14:00
Cross: 1:14:15

These times included the movement and pause time for taking the pictures for the timelapse. That time is constant across all prints so the ranking is still relevant.

Let me know in the comments if there's something you'd like to see printed in a timelapse.
--------------------------------------------------------------------------------------------------------------------------------------------------------
Help support the channel by making purchases through the links below.
As an Amazon Associate I earn from qualifying purchases.

👇3D PRINTING GEAR LIST👇

1️⃣ 3D PRINTER:
Creality Ender 3 V2: [ Ссылка ]

2️⃣ PRINTER UPGRADES:
Upgrades: [ Ссылка ]
Toolkit: [ Ссылка ]

3️⃣Consumables
Nozzles: [ Ссылка ]
Glue Sticks: [ Ссылка ]

4️⃣ PLA FILAMENTS:
🔴Red: [ Ссылка ]
⚪ White: [ Ссылка ]
⚫ Black: [ Ссылка ]
🟢 Green: [ Ссылка ]

👇CAMERA GEAR LIST👇

1️⃣ CAMERA:
Canon T3i (no longer in production)
Canon T8i: [ Ссылка ]
Tripod: [ Ссылка ]

2️⃣ LIGHTS:
Lights: [ Ссылка ]
--------------------------------------------------------------------------------------------------------------------------------------------------------

свернуть