testing out the homemade plow I made last fall with all free materials except for the clevis pin upgrades I did, the plow was originally hung from the front deck mounts with bolts, two wrenches were needed to remove/ install the plow. The clevis pins and key ring clasp for the raise/ lower make removal and instillation lass than 30 seconds!

when I stop and reach behind the tractor, I'm putting the drive belt back on the trans pully, it would sometimes fall off when changing gears. At the time the replacement belt was still shipping.
I will have a video coming out soon on how to replace this belt.

Plow was made from 1 plastic 55 gallon drum, 3/8 carriage bolts and nuts, scrap angle iron, clevis pins with clips, and bailing twine with a key ring clasp attached to the top of the deck raise/lower lever.

I may make a video in the future going into more detail on making the plow.

свернуть