Want to continue learning about engineering with videos like this one? Then visit:
[ Ссылка ]
 
Want to teach/instruct with the 3D models shown in this video? Then visit:
[ Ссылка ]
 
******************************************************************

This 3D animated video explains how a gate valve works. We also look at the operating characteristics of the gate valve, its advantages, disadvantages, and its applications.

**********

Ultimate Valve Playlist with detailed video tutorials of each valve type!

[ Ссылка ]

Or watch each video separately!

Valve Construction and Components Explained
[ Ссылка ]

How Globe Valves Work
[ Ссылка ]

How Ball Valves Work
[ Ссылка ]

How Gate Valves Work
[ Ссылка ]

How Butterfly Valves Work
[ Ссылка ]

How Diaphragm Valves Work
[ Ссылка ]

How Plug Valves Work
[ Ссылка ]

How Pinch Valves Work
[ Ссылка ]

How Pneumatic Valves Work
[ Ссылка ]

How Swing Check Valves Work
[ Ссылка ]

Check out our other videos!

🚢 Marine Diesel Two Stroke Engine - How it Works! - [ Ссылка ]
🚢 Ship Parts and Terminology Explained! - [ Ссылка ]
⚙️How Deaerators Work! - [ Ссылка ]
⚙️How Shell and Tube Heat Exchangers Work! - [ Ссылка ]
⚙️How Power Grids Work! - [ Ссылка ]
⚙️How Watertube Boilers Work! - [ Ссылка ]
⚙️How Dams Work (Hydro Dams)! - [ Ссылка ]
💡Control Valve Types (Gate Valve, Globe Valve etc.)! - [ Ссылка ]
💡Transformer Parts and Functions! - [ Ссылка ]
💡Plate Heat Exchangers Explained! - [ Ссылка ]

📚Want to learn more about engineering?
Then join saVRee to access over 45 hours of engineering video courses! New courses every month!
[ Ссылка ]

Hope to see you on a course soon! 👋

🏫Want to use the 3D model in this video to present, instruct, or teach? Simply join saVRee! We have over 400 engineering models that will make your life a lot easier!
[ Ссылка ]

📱Check out our socials!
[ Ссылка ]

📖You can learn more about engineering in our technical encyclopedia: [ Ссылка ]

▶️Gate valves are linear motion valves. They are multi-turn type valves as the actuator requires numerous turns to change from the fully open to fully closed position. Linear motion valves are slower to operate than rotary motion valves, but this is beneficial in some instances because this trait helps avoid water hammer when opening the valve.

Gate valves are usually installed with in-line piping that requires very little obstruction to flow. When the gate valve is fully open, there is a very low pressure drop across the valve.

The gate valve bonnet allows easy access to the internal valve components. The internal valve components are referred to as the ‘trim’.

Gate valve discs are either of the inclined or parallel design. Three inclined disc designs are used, these are the solid, split and flexible wedge designs.

Gate valve seats are machined directly into the body, or, seat rings are used. Seat rings can be attached to the valve using a screw thread.

Gate valves utilise either a rising or non-rising stem design.

In service temperatures are between approximately -20 to 60 °C. In service pressure can be up to 16 bar. The maximum flow through the valve is between 5-20 metres per second depending upon if the flowing medium is a liquid or gas.


#saVRee #Valve #IndustrialEngineering

свернуть