You will need Protite Clear Casting Resin, Protite Pigments & Silicone mold
Protite Clear Casting & Embedding Resin is perfect for hobby and crafts, or applications where a clear resin is required.

Clear casting resin can also be used extensively as a teaching aid and for applications in metallurgy, zoology, botany and medicine.

MIXING INSTRUCTION

Wearing nitrile gloves and working in a well ventilated area, mix required amount of Catalyst and Resin. Recommended mix ratio at 25ºC is 10 drops of Catalyst to 30ml of Resin.
a. Add 3 drops extra for each 5ºC decrease in temperature.
b. Reduce by 3 drops for each 5ºC increase in temperature.
*GUIDEONLY - FOR MORE INFORMATION VISIT WWW.PROTITE.COM.AU

Not recommended for use below 10ºC.

NOTE: Excess or over use of Catalyst will result in a shortened open time and Resin may cure too fast, overheat and crack.c.

Mix thoroughly for a minimum of two minutes.

Avoid entrapping air bubbles in the resin. Scrape sides and bottom of cup with stirring stick to ensure proper mixing of Resin and Catalyst.

Learn More 👉 [ Ссылка ]

свернуть