How to Replace a Chip & Fuse Component Kit
CLICK HERE for Replacement Parts: [ Ссылка ]

This is a general video that shows the process for removing and installing this chip and fuse. Please note that your board may differ in color shape or size from the board that we are showing in this video.
Also, your components may differ in their location and orientation from the board that we are showing in this video.
I will start by removing the existing chip from the board. I am using a heat gun to apply heat on the chip around the legs. If you do not have a heat gun, you can use your soldering iron.
After I have loosened the chip from the board, I will use my tweezers to lift the chip from the board.
Then I will use my solder wick and iron to clean up the pads on the board.
After I have removed all of the existing solder, I will use a q tip and some isopropyl alcohol to clean up the pads further.
After I have cleaned the pads, I can get my replacement component aligned properly with my tweezers. There is a small dot on the chip, be sure to line up that circle with the arrow on the board.
Next, I will use my tweezers to hold the chip in place and put some flux onto the legs of the component, then I will add some solder to my iron and run the tip of my iron on the legs to solder it in place.
After I have soldered one side of the chip in place, I will then rotate the board and solder each side of the chip to the board.
On the last side I have created a solder bridge, which is not good. I will use my solder wick and iron to remove some of the solder I added. Then I will run my iron back over the legs with more solder and make sure there are no bridges between the legs.
Next, I will take my wire brush and run it over the legs, just to be sure they are clean and there is no excess solder residue.
Next, we will replace the fuse. I am using my heat gun to loosen the fuse from the board, once again if you do not have a heat gun, you can use your iron.
After I have loosened the fuse from the board, I will remove it with my tweezers.
Next, I will use my q tip and isopropyl alcohol to clean up the pads. Then I can add a little bit of solder or solder paste to each of the pads and then place my fuse into position with the tweezers.
After getting the fuse into position, if needed, you can apply more heat to get the fuse soldered to the board.
We have now replaced the fuse and chip in this component repair chip.

LE32B551A6WQXU
LN32B530P7FXZA
LN40C630K1FXZA
LN40C650L1FXZA
LN40C610N1FXZA
LN46C600F3FXZA
LN46C630K1FXZA
UN46C6300SFXZA
UN46D6000SFXZA
LE40A436T1DXXU
LE40A456C2DXXU
LE40A457C1DXXU
LE40M87BDX/XEU
LN40A330J1DXZA
LN40A450C1DXZA
LN40A530P1FXZA
LNS4051DX/XAA
LN46A530P1FXZA
LN46A550P3FXZA
LN46B530P7FXZA
LNT4661FX/XAC
LNT4661FX/XAA

46LA45RQ

DP46840
DP46848
DP46849

KDL-40EX400

X325BV-FHD
X32BV-FULLHD
X46BV-1080P
X46BV-FULLHD

DX-46L262A12
DP46848 P46848-00
DX-46L150A11

VW46LFHDTV10A
VW46LFHDTV20A

NS-32L450A11
NS-32LB451A11

LC-40D68UT

VR-4085DF TW-61951-A040D


HSG1076
Insignia
NS-L322Q-10A
LN32B530P7FXZA
32LB45Q

55.40T04.C06
55.40T04.C07
55.46T03.C48
55.46T04.C19
55.07A9Q.001
55.40T01.C05
55.46T03.C41
55.46T02.C01
55.46T02.004
55.46T02.010
s55.46T02.023
55.46T02.016
55.31T09.C1955.31T09.C23
55.46T03.C31
55.46T03.C40
55.37T05.C52
55.40T04.C04
55.31T06.C18
55.31T06.C29
55.31T06.C28
55.31T06.C31
BN81-02345A
BN81-02368A
55.31T06.C04
55.31T06.C16
55.37T04.C35
55.37T04.C42
55.46T03.C08
55.46T03.C14
55.46T03.C39
55.46T03.C26
0940-0000-3040
55.37T04.C29
55.37T05.C01
55.37T05.C05
55.37T05.C08
55.37T05.C09
55.37T05.C28
55.40T03.C10
55.40T03.C11
55.46T03.C07
55.46T03.C17
55.46T03.C21
55.46T03.C22
55.46T03.C25
55.31T06.C23
55.37T04.C31
55.46T03.C37
55.40T02.013
55.31T12.C02
55.37T05.C46
55.37T05.C60
55.46T03.C33
55.46T03.C46
55.31T09.C14
55.40T04.C05
55.42T01.C04
55.37T03.C02
55.37T03.C09
55.37T03.C11
55.42T01.C05
35-D026949
35-D028421
35-D043264
35-D043894
BN81-01869A
55.42T06.C12
55.42T06.C20
55.42T06.C09
55.42T06.C13
55.42T06.C14
55.42T06.C15
55.42T06.C16
55.42T06.C17
55.42T06.C19
55.31T12.C01
55.31T12.C14
55.37T06.C05
55.37T06.C19
55.42T09.C07
55.42T09.C13
55.42T09.C15
55.46T04.C09
55.46T04.C23
55.37T03.C05
55.42T09.C11
55.42T06.C03
55.37T04.C10
55.37T04.C01
55.37T04.C02
35-D014118
35-D015323
35-D016766
35-D019140
35-D020223
35-D021630
35-D027939
35-D033271
35-D033602
996510010062
996510010061
996510018929
996510013208
55.37T03.041
55.06A69.001
55.37T03.021
55.37T03.035
55.37T03.050
55.37T03.057
55.37T03.064
55.37T03.C03
55.37T03.065
55.40T03.C05
55.40T02.C03
55.40T03.C02
55.40T02.C08
55.46T02.C04
35-D012135
35-D021291
996510009692
BN81-01868A
35-D010032
35-D010611
35-D015131
35-D026047




TV Repair Made Easy™
© 2016 ShopJimmy.com, LLC.

свернуть