Video about how to make laminated sheets, out of soda cans (aluminum or steel), covered on the backside with cloth (thin nylon mesh, acrylic or nylon cloth, etc, in my case: part of a flag).
Good property: the cloth-side is an electrical isolator, the steel side shields very effective and can be soldered.
Soda cans can easily be “dissected” with a kitchen scissor, pliers, etc.
Please note: the edges of steel and aluminum cans be razor-sharp when you “attack” them with a scissor, pliers or otherways, so be careful, keep your hands away from the sharp edges and/or use (say: gardening) gloves.
When the soda can has become a flat piece of metal, shape the edges off with a kitchen scissor. Then they loose a lot of their sharpness an can be handled quite safely, to be covered with cloth.
The glue that I use is “contact glue”, Brand: “Bison kit” in the Netherlands. With this kit both the cloth/nylon mesh and the thin sheet metal itself can be glued together very properly.
Cover the whole backsite of the metal plate with Bison kit and “tap” the cloth to it, after a few minutes, when all is attached, cover the cloth fully with Bison kit.
When it sticks after some time: sprinkle some gypsum powder or talk power or (simply) dust over it.
The "home made electric bike" video's to which I refer are here:
first video [ Ссылка ]
second video [ Ссылка ]
All the videos hat I have published on You Tube can be found via my Channel Trailer: Link is
[ Ссылка ]
In thematic order you can find these video’s under the “comments” section.
Important: to find all the links to the (+/-700) video’s on my YT Channel, select, in the comments section, “NEWEST FIRST”
My books about electronics are available via the website from “Lulu”, search for author “Ko Tilman” there.
[ Ссылка ]=
There is an important video via which you can buy a document where I give links to many of my video’s, published between 2010 and 2018.
Link is: [ Ссылка ]
My books are also available via Barnes and Noble and via Amazon.
Regarding all my video’s: I constantly keep them actual, so the original video’s with the most recent information are always on YouTube. That is the source, and search there. When my video’s are reproduced or re-edited on other websites/channels you can not (!) be sure about the original content (=really working electronics) and important adaptations to the circuits.
Be aware of that, I saw on the internet my circuits reproduced in a poor or even not proper way. I can not help that, sorry. Upload 26 May 2019.
