Buy Now!
New Sway Bar Link Set from 1AAuto.com [ Ссылка ]
New Sway Bar Link from 1AAuto.com [ Ссылка ]
This video shows you how to install a rear sway bar link on your 2005-2010 Pontiac G6. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.
This repair was done on a 2009 Pontiac G6 Base 2.4L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2005 Pontiac G6
2006 Pontiac G6
2007 Pontiac G6
2008 Pontiac G6
2009 Pontiac G6
2010 Pontiac G6
Tools you will need:
• Pry Bar [ Ссылка ]
• 16mm Socket [ Ссылка ]
• 19mm Socket
• Cutoff Wheel
• 3/8 Inch Impact Gun
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Silicone Paste
• Razor Blade / Gasket Scraper
Subscribe: [ Ссылка ]
Check out our playlist:
Pontiac G6 2005-2010 1st Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
