Buy Now!
New ABS Wheel Speed Sensor Set from 1AAuto.com [ Ссылка ]
New ABS Wheel Speed Sensor from 1AAuto.com [ Ссылка ]
This video shows you how to install a new ABS wheel speed sensor for your 2013-2019 Ford Escape. ABS wheel speed sensors are critical to the operation of your vehicle's ABS and ESC systems, which use real time wheel speed data to ensure your vehicle stays safe and on the road. These magnetic sensors are sensitive and susceptible to damage, which would require replacing them.
Estimated installation time for a professional technician is approximately: 24 minutes
This repair was done on a 2013 Ford Escape Titanium 2.0L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2013 Ford Escape
2014 Ford Escape
2015 Ford Escape
2016 Ford Escape
2017 Ford Escape
2018 Ford Escape
2019 Ford Escape
Tools you will need:
• 19mm Socket
• T25 Torx Socket
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Wheel Chocks
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Ford Escape 3rd Generation 2013-2019: [ Ссылка ]-
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
