My Kenwood KDC-599 is sending code Protect Send and I cannot reset it. My Reset does not help. This thing is dead. No more Kenwood Radios done!

Updated Fix!!!
1. TURN POWER OFF NO POWER
2. POP OUT RADIO FACE
3. HIT RESET BUTTON. 3 OR 4 SECONDS.
4. PUSH BACK RADIO IN.
5. WHILE HOLDING BUTTONS 3 AND 6.. PRESSED IN… TURN IGNITION ON.
6. THEN PUT POWER ON AND YOU GET THE DC ERROR
7. KEEP POWER ON!!!
8. PRESS BUTTON 1 FOR 2 SECONDS IT SAYS OK
9. THEN BUTTON 2 FOR 2 SECONDS IT SAYS 0
10. TURN POWER OFF I WAITED 10 SECONDS…
11. TURN POWER BACK ON AND IT SHOULD WORK!!!

свернуть