[ Ссылка ] - This video demonstrates how to attach a crimp-on type F connector to RG59 coaxial cable. A BNC screw-on connector is also attached to the F connector for use in CCTV installations but this part is optional.
Here are the steps.
1) Using a coax cable stripper, remove the outer layers of the RG-59 cable. The TL-22 cable stripper from CCTV Camera Pros is pre-adjusted to cut the cable in the exact locations and depths.
2) Peel back all of the copper braided shielding and make sure none is left touching the dielectric insulator or center core.
3) Firmly place the crimp-on F connector onto the coax cable. The center core and dielectric insulator are placed inside the inner cylinder of the connector. The copper braiding is placed on the outside.
4) Place the grip rings of the F connector inside the .324 inch setting of the TL-70 coax cable crimping tool and ratchet it down all the way.
5) Confirm that you have a snug connection by giving it a few tugs.
6) If you are using your RG59 cable for a CCTV system installation, you probably need a BNC connector on the end. If you do, you can use a BNC screw-on type connector to attach to the F connector.
