In this video I show you how to program a fob for a 1995 and older Chevrolet pickup, Tahoe, or Suburban. This method may work for other vehicles but these are the only ones I know about. This only works if your vehicle has keyless entry equipped from the factory. You can check by looking in your glove box for the code "AU0". If you see that code then your truck is equipped for keyless entry and this method will work. If you don't like videos I will list the written steps below. Thanks for watching and be sure to subscribe!
Steps for Programming a Key Fob:
1. Get a wire and strip both ends(a paper clip is also fine, you just need something that will make contact with both ports)
2. Jump port 6 with port 7 and be sure you hear the locks exercise.
3. Once the locks exercise, hold down both buttons until you hear the locks exercise again.
4. Your fob is now programmed!
