Buy Now!
New Engine Oil Cooler from 1AAuto.com [ Ссылка ]
This video shows you how to install an engine oil cooler on your 2008-2013 Nissan Rogue.
This repair was done on a 2009 Nissan Rogue S 2.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Phillips Head Screwdriver [ Ссылка ]
• 14mm Wrench [ Ссылка ]
• 12mm Socket [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 21mm Socket
• 27mm socket [ Ссылка ]
• Coolant Funnel Set
• Trim Tool Set [ Ссылка ]
• Hose Clamp Pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• 1/2 Inch Impact Gun [ Ссылка ]
• 3/8 Inch Impact Gun
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Cloth Rags [ Ссылка ]
• Engine Oil
• Gloves [ Ссылка ]
• Paper Towels [ Ссылка ]
• Safety Glasses
• Drain Pan
• Floor Jack [ Ссылка ]
• Funnel
• Jack Stands [ Ссылка ]
• Pick [ Ссылка ]
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
Nissan Rogue 2008-13 1st Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
