Buy Now!
New Control Arm with Ball Joint from 1AAuto.com [ Ссылка ]
This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2000-2007 Ford Focus. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This repair was done on a 2006 Ford Focus ZX4 2.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• 18mm Wrench
• 21mm wrench
• 15mm Socket [ Ссылка ]
• 18mm Socket
• 19mm Socket
• Pickle Fork
• Channel-Lock Pliers [ Ссылка ]
• Pliers
• T50 Socket
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Pole Jack
• Punch
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
Ford Focus 1st Generation 2000-2007: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
