three-
component polyurethane flooring system designed
for industrial floors and protection coverings in
the field of the food and beverage industry,
chemical industry, pharmacy, healthcare area,
electronics, mechanical engineering

recommended for conditions requiring the
maximum mechanical, physical and chemical
resistance.

non-toxic
product in case of contact with food products and
drinking water. It can be used indoors and
outdoors
Recommended for:
Protection of industrial floors in food and
beverage industry, chemical industry, pharmacy,
healthcare area, electronics, mechanical
engineering.
 Anti-static, non-sparking, anti-slip, anti-
bacterial, non-dust and decorative coatings.
 Waterproofing and protection of terraces, roofs
and balconies.

Features and benefits:
Excellent adhesion to all construction materials.
 Sound, monolithic, wear resistant coating.
 Resistant to wide range of temperature, non-
combustible
 Warm water resistance (60 oC - 90 oC).
 Excellent biological and chemical resistance.
 Can be applied to humid substrate.
 Non-toxic, hygienic material.
 Negative hydrostatical resistance.

Applocations:
Concrete substrate conditions (standard):
 Hardness: R28 = 15MPa.
 Humidity: W 10%.
 Temperature: 5-35 oC.
 Relative humidity: 85%.

Surface preparation:
Clean the surface using a high-pressure washer, if
possible. Remove oil, grease and wax
contaminants. Cement laitance, loose particles,
mould release agents, cured membranes must
also be removed. Fill surface irregularities with
the necessary product.
Poor quality or contaminated substrates cannot be
made satisfactory by priming.
Mixing:
Mix part C, part A and part B. Blend parts for 3-4
minutes until the liquid becomes homogeneous.
Use spiral slow-speed mixer (150-200rpm). The
consistent mix must be spread up to a
recommended thickness of 4-10mm as soon as
the mixing is properly done. Use steel trowel to
smooth the new coating. Use spike roller to free
the closed gases.

свернуть