Buy Now!
New Sway Bar Kit from 1AAuto.com [ Ссылка ]
This video shows you how to install a sway bar kit, consisting of the sway bar, sway bar links, and sway bar bushings with brackets on your 2006-2013 Chevrolet Impala. When your sway bar has rusted or bent to the point of causing problems with your suspension, steering, or alignment, you’ll need to replace it, and likely the links and bushings as well.
This repair was done on a 2009 Chevrolet Impala LT 3.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2006 Chevrolet Impala
2007 Chevrolet Impala
2008 Chevrolet Impala
2009 Chevrolet Impala
2010 Chevrolet Impala
2011 Chevrolet Impala
2012 Chevrolet Impala
2013 Chevrolet Impala
Tools you will need:
• 13mm Wrench [ Ссылка ]
• 13mm Socket [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 18mm Socket
• 19mm Socket
• 21mm Socket
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer
Subscribe: [ Ссылка ]
Check out our playlist:
Chevrolet Impala 2006-2013 9th Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
