Buy Now!
New Sway Bar Link Set from 1AAuto.com [ Ссылка ]
New Sway Bar Link from 1AAuto.com [ Ссылка ]

This video shows you how to install new TRQ sway bar links on your 2007-2011 Toyota Camry. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.

This repair was done on a 2007 Toyota Camry SE 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry

Tools you will need:
• 17mm Wrench [ Ссылка ]
• 18mm Wrench
• 17mm Socket [ Ссылка ]
• 19mm Socket
• 21mm Socket
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet [ Ссылка ]
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• 6mm Allen Wrench
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Wheel Chocks

Subscribe: [ Ссылка ]

Check out our playlist:
Toyota Camry 2007-2011 6th Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть