Buy Now!
New Ball Joint from 1AAuto.com [ Ссылка ]

1A Auto shows you how to repair, install, fix, change or replace loose, worn, or creaking ball joints. This video is applicable to the 07, 08, 09, 10, 11 Toyota Camry

🔧 List of tools used:
• Flat Blade Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 19mm Wrench [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket [ Ссылка ]
• 21mm Socket [ Ссылка ]
• Ball Joint Press
• Dead Blow Hammer [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Side Cutters
• 1/2 Inch Breaker Bar [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Cloth Rags [ Ссылка ]
• Rust Penetrant
• Center Punch [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer [ Ссылка ]
• Jack Stands [ Ссылка ]
• Rubber Mallet [ Ссылка ]
• Sledge Hammer [ Ссылка ]

For More Info visit us at [ Ссылка ]

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть