👋 Today I upgrade the suspension on my 2014 R35 Nissan GT-R! The GTR could really use an extra bump in handling and looks, so I decided to install the H&R lowering springs. These drop the R35 GT-R a half inch all around and still retain the three damping settings. This installation guide will be identical to all R35 Nissan GTR models form 2009-2022. Very simple installation to be honest and I had a lot of fun with this project! To start installing lowering springs on the R35 Nissan GTR you'll need to remove the rear seats and rear interior. Seats pop out with a tab, and then the back rest just have 1 bolt. Then the center console pops up and there is 1 plug. Then the speaker surround pops off. That was hard to get off and I pulled it hard enough to fall back into the seat ;) Then the sides all just pop off with plastic tabs. I did take the seatbelt bolts out to get the upper pieces out. Last the rear shelf slides off after the plastic screws are removed. Disconnect the plug from the top of the damper. You have the strut tower under the foil and can loosen the 3 bolts. Only 1 bolt holds the rear shocks to the control arm. With the rear struts out, use the spring compressor and then take the top bolt out. You won't need the spring compressor to reinstall the H&R springs in the rear. The front struts are pretty simple to take out as well. You'll need to take out the swaybar end link bolt, lower shock bolt, brake line bolt, upper control arm bolt and rubber grommets holding the brake lines. Then the 3 bolts on the top of the strut get removed and lastly unplug the damper cable. I found it was easiest to push the lower control arm down, and the upper control arm up, and slide the strut towards the engine and down. Let the underside rotate around the axle and you'll get it removed. I did need the spring compressor to install the new lowering springs for the front struts. Takes about 7 hours but is very doable! Car has a solid half inch drop in all 4 corners and looks great! Excited to get the alignment done and test out the new springs in the GTR! Video to come of the new lowered look and handling characteristics!!
INSTALLED H&R Lowering Springs on my R35 Nissan GT-R! SLAM IT
🤠Bros FOURR Speed Apparel : [ Ссылка ]
😈 SUBSCRIBE: [ Ссылка ]
❤️ Follow my IG [ Ссылка ]
Check out Fitment Industries for Springs, Coilovers, Air Ride and wheels!!
team.fitmentindustries.com/Brosfourrspeed
YouTube: @FitmentIndustries
Instagram: @fitmentindustries
Tools Used:
- Spring Compressor Tool: [ Ссылка ]
- Pass Thru Socket Set: [ Ссылка ]
- Jack Stands: [ Ссылка ]
- Floor Jack: [ Ссылка ]
- Impact Wrench: [ Ссылка ]
Our Equipment:
- Cannon M50: [ Ссылка ]
- Rode Mic: [ Ссылка ]
- 64GB SD Card: [ Ссылка ]
- GoPro Hero 9: [ Ссылка ]
- DJI Mavic Air 2: [ Ссылка ]
- Apple Imac 21in: [ Ссылка ]
- LowePro Bag: [ Ссылка ]
- Tripod: [ Ссылка ]
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📺 OUR TOP PLAYLISTS :
Tacoma Videos: [ Ссылка ]
GT-R Videos: [ Ссылка ]
Supra Videos: [ Ссылка ]
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🗣 TALK TO US ON SOCIAL MEDIA !
Instagram 🙋🏻♂️ [ Ссылка ]
Facebook 🙋🏻♂️ [ Ссылка ]
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
👁 WATCH MORE OF OUR AUTOMOTIVE VIDEOS :
Installing Coilovers On My Nissan 370Z Nismo!! SLAM IT
[ Ссылка ]
A90 Toyota Supra H&R Lowering Spring Installation!! Perfect Stance!!
[ Ссылка ]
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🔮 WATCH OUR OLD VIDEOS :
How To Drive A MANUAL - (The Secret To Never Stalling)
[ Ссылка ]
5 Things You Should Never Do In A Manual Transmission Vehicle!
[ Ссылка ]
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
❤️ YOU MAY ALSO LIKE :
INSTALLED KW Lowering Springs On A 2017 Nissan GT-R
[ Ссылка ]
Should You Run Coilovers or Lowering Springs?
[ Ссылка ]
Top 10 Nissan GTR Modified | Best GTR in World | Supercar | M Bros
[ Ссылка ]
Building a Nissan R35 GTR : Installing Air Suspension and the DREAM Wheel & Tire Setup!!!!! [ Ссылка ]
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📥 SPONSORS / COLLABORATIONS :
Want us to promote your product? Email for rates and availability 🤝
Email: brosfourrspeed@gmail.com ✍️
Music By: Joakim Karud
Lowrider, Let's Go Surfing, Great Days
www.soundcloud.com/joakimkarud
#nissangtr #loweringsprings #loweringspringinstall
