NEJE Portable Laser Engraving Machine Master 2S 20W with small upgrade (unbox / assembly / test)
If you like my work, you could support me:
[ Ссылка ]
[ Ссылка ]
in this video i will show you NEJE Master 2 s 20W desktop Laser
Engraver and Cutter. NEJE brand new master 2s series motherboard’s hardware performance; 2s series motherboard will update the GRBL 1.1f of ATMELs chip to brand new GD32 MCU. Which has improved 50% performance compare with STM32 chip.There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop.4mm plywood cutting in 1 pass with air-assist, and the cutting is very clean. Pre-assembled parts, it just has to install 4 screws, need 1 minute to install the machine.
Supports Software: NEJE APP , NEJE software , Benbox, LaserGRBL ,LightBurn
Can Engrave MDF,Balsa,Paper,Wood,Fabric,Plastic,Leather,
Plywood,etc.
engraver area 170 x 170 mm
laser module 450nm 20W
optical power: 5.5W
You can buy NEJE Engraving Machine Master 2S 20W here:
NEJE Store: [ Ссылка ]
NEJE on Aliexpress: NEJE Master 2S 20W [ Ссылка ]
NEJE Master 2S Plus [ Ссылка ]
NEJE on Banggood: NEJE Master 2S 30W [ Ссылка ]
NEJE on Amazon-US: [ Ссылка ]
NEJE on Amazon-DE: [ Ссылка ]
NEJE on Amazon-UK: [ Ссылка ]
NEJE on eBay: [ Ссылка ]
Cloudray 60W Air Compressor: [ Ссылка ]
Laser Engraver Pad :[ Ссылка ]
stl air assist [ Ссылка ]
stl air assist [ Ссылка ]
stl Z height mount [ Ссылка ]
