EMC 3 BRASS GLAND

The new generation of Bimed's EMC and derivation
gland shows signicant advantages compared to
other existing cable glands. The patented contact
system inside the gland allows all degrees of freedom
which are neccessary to install a cable easily; the cable
can be pulled forward and backward inside the gland
without damaging the cable shielding. This is realized
by specially designed contact elements. This feature is
most advantageous when connectorizing the single
cores of the cable.

Also the cable can easily be rotated inside the gland
without damaging the cable shielding -- most
important when installing the gland at an industrial
connector. The unique mechanism of the integrated
contact system therefore show the following features:
For small cable diameters in the lower clamping range
of the gland the contact system won't touch the cable
braiding during the installation process at all. For
bigger cable diameters in the upper clamping range
of the gland, the contact system will rotate freely
inside the gland together with the cable itself. Only
when tightening the cap the contact element will be
xed and will be pressed against the cable shielding
to ensure a low resistance electrical contact between
gland and cable braiding. Simultaneously IP68
protection class and cable anchorage according to the
EN 50262 is achieved.

This straight forward application and convenient
installation of the gland saves a lot of time and
therefore a lot of money.

Shielding and derivation tests performed with this
gland show exceptional values. So this EMC and
derivation gland from Bimed will be used wherever an
outstanding performance is needed. Simple
application, fast installation together with the
patented contact system makes Bimed's gland unique
among the cable glands.

свернуть