in this video i demonstrated How To Make Series Test Lamp / Portable Series Test Lamp / Test Lamp Board for Workbench. it is a 100 watt lamp which is connected in series of the load / unit under test (UUT).
#series #lamp #board
in case of any short circuit of overload condition the lamp will control the current so that during repair work or troubleshooting any circuit. in case of any mistake during repair work or any failure in the circuit, this series lamp will glow that will a indication that there is over-current consumption. i shared series board connection diagram, so you can make it very easily . i used a 100 watt bulb and a power cable. i cut one wire from center and connected both end of the cut-point wire to the lamp holder and installed the bulb in the holder
How To Make Series Test Lamp,how to make portable series lamp,how to make series test,how to make series test lamp,how to make seris,how to make series board,how to make series circuit,how to make series board at home,how to make series bulb tester,haseeb electronics,series board,series board banane ka tarika,series board testing,series board connection,series board connection diagram,how to make series test lamp board,series lamp,make a series bulb connection
best regards
Haseeb Electronics

свернуть