Buy Now!
New Sway Bar Link Set from 1AAuto.com [ Ссылка ]
New Sway Bar Link from 1AAuto.com [ Ссылка ]

This video shows you how to install new front sway bar links from TRQ on your 2010-2014 Subaru Outback. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.

This repair was done on a 2012 Subaru Outback 2.5i 2.5L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback

Tools you will need:
• 17mm Wrench [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket
• Locking Pliers [ Ссылка ]
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• 6mm Hex Socket
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Wheel Chocks

Subscribe: [ Ссылка ]

Check out our playlist:
Subaru Outback 3rd Generation 2010-2014: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть