Canon CR-N500 cameras are quite an investment in gear. I was looking for a secure way to store and transport these PTZ cameras because they don't have a lens cap. But the foam for the Pelican case is so fragile and was quickly falling apart.
I wanted to secure the Pelican foam with Plasti Dip so that it will last longer in the case. This is probably a weekend project so take that into consideration for drying time.
Lessons learned: Stick with Plasti Dip and don't use Flex Seal. If I was to do this again, I would get 8 cans: [ Ссылка ]
Gear in this video:
Canon CR-N500: [ Ссылка ]
Pelican 1637 Case with Foam: [ Ссылка ]
3m Respirator: [ Ссылка ]
Sennheiser Mics: [ Ссылка ]
Filmed with Sony PXW-Z90: [ Ссылка ]
#pelicancase
#canon
#ptzcamera
#crn500
Timestamps:
00:00 start
02:45 before plasti dip
03:24 respirator
03:46 1st coat
05:01 comparison with plasti dip and none
05:57 1st coat results
06:53 2nd coat
06:58 2nd coat results
07:52 comparison
08:52 drippy Flex Seal
11:17 Flex Seal results
11:53 Wrap up
13:46 Flex Seal Drips
15:45 Final Install
17:03 Please Subscribe!
