Click for more info and reviews of this Fastway Wheel Chocks:
[ Ссылка ]
Check out some similar Wheel Chocks options:
[ Ссылка ]

[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]

Full transcript: [ Ссылка ]
Hello everybody, this is Jeff with etrailer.com. Today we're gonna take a look at the Fastway Onestep XL Wheel Chocks for the tandem axle trailers and RVs, with a 16 inch to 30 inch tire spacing. And this is for a quantity of two chocks. Now these wheel chocks will minimize the give between your tandem-axle tires, help prevent the rocking and rolling of your RV or trailer when it's parked. So this allow you to freely move around in your trailer RV with virtually no wheel movement. So this is designed for the travel trailers, fifth wheels, boats, cargo, and even horse trailers.

What's nice about these chocks is considerably faster and easier to use than the chocks that require the ratcheting style, this will save you a lot of time and hassle. It is a quick, quick, simple mounting and removal. Basically, you place this folded chock, you can see how the chock will fold up and you put this between the tandem-axle tires, and then when you stepped down on the center right here and you've stepped all the way down, the arms would flatten out. And these will firmly press these wedges into both tires to hold them securely. Just want to show you here's an insert that'll show you with one of these chocks installed on an RV.

And then to release it, all you have to do is take this long cable right here, pull up on this cable and that'll pull the uh, wedges apart and allow you to pull them out from between the tires and you're ready to go. Now these are, they do offer an adjustable length. If you look on the arms here, these arms can be repositioned along the outer wedges. If you look at the wedge ends right here, you can see there's three holes, and then there's a bolt that you can put it in either one of those holes for a different length. And it can also be repositioned along these arms right here.

The overall length can be adjusted by moving the pin and clip. You can see there's a pin and clip right here. And then there's one over here on this arm. Basically, all you have to do is pull the clip out, push out the pin, extend it to whatever hole you need. Slide your pin back through, clip it and you've adjusted it.

And what's nice is if you notice this arm has quite a few different adjustment holes. This one's the same way, and then this one has about three. So there's a multitude of adjustments that you can make on these arms. The other nice feature if you look on the wedge where the arm connects to the wedge, there's a hole right above it. That hole was designed to put a padlock through there. Now the padlocks are not included we do sell those separately, but when you put a padlock through there on each wedge on the other end also, it'll keep that arm from opening so they'll keep them locked into place so nobody would take them. These are a nice durable steel construction. You'd see they have a nice bright red finish on them for visibility. And the wedges on each end, they have a nice sink plating on them to help resist corrosion. Does come with all the parts you need, the clevis pins, the Cotter pins, even comes with the hex wrench that you used to take the bolt out on the end there. Few specs on this, it is for a quantity of two chocks. The application again is tandem-axle trailers or RVs. And we mentioned the adjustable length can be anywhere from a minimum of 16 inches to a maximum of 30 inches. But that should do it for the review on the Fastway Onestep XL Wheel Chocks for the tandem axle trailers and RVs..

свернуть