Buy Now!
New Control Arm from 1AAuto.com [ Ссылка ]

This video shows you how to install new control arms in your 2006-2009 Mercedes-Benz E350. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.

This repair was done on a 2008 Mercedes-Benz E350 4Matic 3.5L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2006 Mercedes-Benz E350
2007 Mercedes-Benz E350
2008 Mercedes-Benz E350
2009 Mercedes-Benz E350

Tools you will need:
• 18mm Wrench
• 21mm wrench
• 17mm Socket [ Ссылка ]
• Exhaust / Muffler Hanger Removal Pliers [ Ссылка ]
• 1/2 Inch Impact Gun [ Ссылка ]
• 3/8 Inch Impact Gun
• E14 Socket
• T55 Torx Socket
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• 10mm Hex Socket
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Pole Jack
• Wheel Chocks

Subscribe: [ Ссылка ]

Check out our playlist:
Mercedes Benz E350 3rd Generation 2006-2009: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть