Introduction:
Welcome to our video tutorial on how to program your Craftsman Wireless Keyless Entry Pad (3050) for your garage door opener. If you're tired of fumbling for your garage door remote, this keyless entry pad is the perfect solution. In this video, we'll walk you through the simple programming instructions so you can start using your keyless entry pad right away.
Step 1:
The first step is to locate the "Learn" button on your garage door opener. This button is usually located near the antenna wire, and may be colored red or purple. Once you've located the "Learn" button, press and release it. You'll notice that the indicator light on your garage door opener will start flashing.
Step 2:
Next, you'll need to enter your personal identification number (PIN) on the keyless entry pad. This is the code that you'll use to open and close your garage door. Choose a number that is easy to remember, but not easily guessed by others.
Step 3:
After entering your PIN, press and hold the "Enter" button on the keyless entry pad. You'll notice that the indicator light on your garage door opener will flash again.
Step 4:
Now it's time to test your new keyless entry pad. Stand outside your garage door and enter your PIN on the keypad. The garage door should open or close, depending on its current state. If the door doesn't respond, repeat the programming steps again from the beginning.
Conclusion:
Congratulations, you've successfully programmed your Craftsman Wireless Keyless Entry Pad (3050) for your garage door opener. This keyless entry pad is a convenient and secure way to access your garage without the need for a remote. If you have any questions or need further assistance, feel free to leave a comment below. Thanks for watching!
