How to check and flash your Radiomaster TX12/Zorro/TX16S ELRS firmware

[ Ссылка ]

A complete guide to step up your ELRS drone with your radio the first time.

[ Ссылка ]

Many of us started with this radio as it is compact and full of features, but there are not many details on the manual as of how to properly set it up, so i decided to make a short video to demo the essential functions that i think you must know. I hope this help you flatten your learning curve.

I decided to separate the video into part 1 and part 2, otherwise, it will just be way too long and boring...

This is where you can purchase the TX12 at Radiomaster website.

[ Ссылка ]

Features
Added internal ExpressLRS module support
Updated main board design from STM32F207 to STM32F407
Improved USB-C QC 3.0 Charging
Precision hall-effect gimbals as standard
EdgeTX operating system installed from the factory
Updated rear case with comfortable grips
Improved S1 / S2 slider grip
SD Card included
Provide M1 and M2 modes
Specification
Item: TX12 Mark II Radio
Size: 170*159*108mm
Weight: 363g
Frequency: 2.400GHZ-2.480GHZ
RF Chip: ExpressLRS (ELRS) / CC2500
Working Current: 320mA@8.4V (ELRS) / 180mA@8.4V (CC2500)
Voltage Range: 6.6-8.4v DC
Radio Firmware: EdgeTX (Transmitter) / ExpressLRS (RF module) / MPM (RF module)
Channels: Up to 16 (depending on the receiver)
Display: 128*64 Monochrome LCD display
Gimbal: High precision hall gimbals
External module: JR/FrSKY/Crossfire compatible
Upgrade Method: USB/SD card & EdgeTX Buddy online or EdgeTX Companion PC software
USB Charging: QC3 USB-C
SD Card: Included

свернуть