GladiuX
[ Ссылка ]
How to Un-Brick a TP-LINK Wireless Router(WR740N)
**Would Work For Any Router Of TP-LINK Newer Than And WR740N**
What You Would Need;
1. Bricked Router Here(TP-LINK WR740N)
2. Your Router's Stock Firmware
3. An Ethernet Cable(Comes In The Box)
4. TFTP Utils (TFPTUtil is an open source TFTP server written in C#.
[ Ссылка ]
Latest version can be downloaded using subversion at:
[ Ссылка ] )
5. A Matchstick
6. A Brain(I'm Sorry Don't Have Any Link To Download a Brain :/)
Steps To Un-Brick:
1. Turn Off The Router My Friend Is Helping Me Here
2. Connect The Ethernet Cable To PC And Router's WAN Port
3. Tell Your Computer To Setup a Static IP and Subnet Mask i.e IP(192.168.0.66) Subnet Mask(255.255.255.0) [Shown In The Video :) ]
5. Start TFTP Utils
6. Copy The Firmware And Put It In TFTP Utils Root Directory
7. Rename It To " wr740v4_tp_recovery "
8. Take a Matchstick and Press The Reset Button(Keep Pressing Until I Tell You :P
9. Now Turn On The Router While Pressing The Reset Button
10. Keep Pressing For a Second Or 2 The WAN Light Would Light Up
11. Let TFTP Utils To Listen On Your Ethernet Card's IP(Very Important)
12. Follow Steps 8, 9 And 10 Again! After Turning Router Off
13. The Router Will Automatically Start Pulling The Firmware From Your PC And Install It Afterwards
14. Wait For a Few Minutes And Let The Router Restart
15. Enjoy Your Un-Bricked Router!
Don't Thank Us By Just Viewing! :( Subscribe, Share & Comment
NEXT UPCOMMING Uploads:
** How To Install Open-WRT (Linux) On TP-LINK WR740N **
** How To Install DD-WRT (Linux) On TP-LINK WR740N **
Peace
