LL-Nemesis Sightron S-tac 2.5x17.5-56

5" screen Digital add on system

Ultra high performance Digital add on system with built in built in windage/elevation IR illuminator + IR dimmer

NEW 820NM or 850NM AS leds.

25mm-40MM scope tubes

Up to 48mm eye bell fitment

Please note the 38mm lens with the New 820NM narrow beam profile led is more than enough IR for 90% of applications & is incredibly powerful!

Ships with 25mm/30mm scope bracket unless requested

Due to demand we are having to offer these as Pre ORDER for the time being
Will dispatch in 4-10 working days

High quality 5" 800x480 HD screen with external dimming/contrast control.
KPC E700 PUB with large aperture low light lens.
Built in IR with variable power Dimming control + windage elevation adjustable to perfectly align with viewed image.
Single cable from camera to screen so minimal trailing cables.
Built in rechargeable batter pack comprised from Panasonic cells,Approximately 4-12 hours constant run time depending on IR setting.(can be boosted from external pack)
New 820NM narrow beam profile Olson AS led allowing large lens performance from a much smaller IR lens + the original AS led option for closer range use.
Super strong light weight chassis system giving a much sturdier set up compared to a project box build.
supplied with 4x bush's to allow fitment to multiple optics


Please note the new 820NM led gives a much narrower beam profile + more power so a smaller IR lens can be used,however it is less covert than the 850NM/940NM leds.

The Ludicrous lumen's "Nemesis" Built in IR NV system uses our new QD mounting system allowing you to mount to scope main tubes of up to 40 mm,The standard 25mm/30mm lower bracket is supplied unless requested.

Our system will give all the performance/feel (if not more)of a commercial/retail system at a fraction of the cost.

Incredibly strong & rigid & a much more stable solution then the flexi pipe/home built type kits that are available, it also allows perfect alignment of the camera down the scope as the clamping system naturally self centre's .

Additional scope brackets available HERE 25mm-40mm scope tubes

Using a a sliding clamping system where the clamping part of the bracket remains fixed to the scope & is quickly attached to the NV main screen part ,this is then secured in place with a M4 bolt on a thumb wheel that passes through the screen part ensuring the most secure lockup available.

This new Mounting also allows you to fit our adjustable torch/IR upper bracket in place of the NV system if required.(Available here )

свернуть