1979 Chevy Camaro Z28 Engine removal and disassembly (The Cursemaro)
Join us on social media at
[ Ссылка ]

It all started with a bent pushrod in the engine of my 1979 Chevy Camaro Z28 and escalated from there. Once I replaced the bent pushrod I did a compression check and found a 25 psi fluctuation between all the cylinders with one cylinder being 60 psi off. When I dug further I found a ground lifter and after pulling the camshaft I found one cam lobe completely gone. So its time to remove this engine from the 1979 Chevy Camaro Z-28. The engine is a 400 sbc bored .30 over with a pair of stock cast iron open chamber heads.

Join us on social media at
[ Ссылка ]

Check out my Roadkill Nights video at

[ Ссылка ]

Special thanks goes out to my good friends at 671 Grains that supplied the music. You guys can check them out at

[ Ссылка ]...

or on Facebook

[ Ссылка ]

свернуть