Buy Now!
New Brake Caliper from 1AAuto.com [ Ссылка ]

A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle. This video shows you how to install a rear brake caliper on your 2007-2014 Cadillac Escalade.

• Check here for more videos on the 2007-14 Cadillac Escalade: [ Ссылка ]

This repair was done on a 2013 Cadillac Escalade Luxury 6.2L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Cadillac Escalade
2008 Cadillac Escalade
2009 Cadillac Escalade
2010 Cadillac Escalade
2011 Cadillac Escalade
2012 Cadillac Escalade
2013 Cadillac Escalade
2014 Cadillac Escalade

Tools you will need:
• Pry Bar [ Ссылка ]
• 11mm Wrench [ Ссылка ]
• 18mm Wrench
• 17mm Socket [ Ссылка ]
• 18mm Socket
• 22mm Socket [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Driver
• Torque Wrench [ Ссылка ]
• Brake Grease
• Liquid Thread Locker
• Drain Pan
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]

Subscribe: [ Ссылка ]

Check out our playlist:
Cadillac Escalade 2007-14 3rd Gen: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть