Buy Now!
New Tie Rod Set from 1AAuto.com [ Ссылка ]
New Tie Rod from 1AAuto.com [ Ссылка ]

This video shows you how to replace the inner tie rods on your 2003-09 Toyota 4Runner. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.

This repair was done on a 2003 Toyota 4Runner SR5 4.0L Sport Utility 4-Door and the process should be similar on the following vehicles:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner

Tools you will need:
• Pry Bar [ Ссылка ]
• 22mm Wrench
• 12mm Socket [ Ссылка ]
• 19mm Socket
• 21mm Socket
• 22mm Socket [ Ссылка ]
• Inner Tie Rod Removal Tool [ Ссылка ]
• Locking Pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Anti-Seize Grease
• Hammer

Subscribe: [ Ссылка ]

Check out our playlist:
Toyota 4Runner 2002-2009 4th Gen: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть