Shop for New Auto Parts at 1AAuto.com [ Ссылка ]
This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding. This video shows you how to install a new TRQ direct-fit bolt up catalytic converter assembly on your 2002-06 Toyota Camry.
• Check here for more videos on the 2002-2006 Toyota Camry [ Ссылка ]
This repair was done on a 2005 Toyota Camry LE 2.4L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2002 Toyota Camry
2003 Toyota Camry
2004 Toyota Camry
2005 Toyota Camry
2006 Toyota Camry
Tools you will need:
• 12mm Wrench [ Ссылка ]
• 14mm Wrench [ Ссылка ]
• 22mm Wrench
• 12mm Socket [ Ссылка ]
• 14mm Socket [ Ссылка ]
• O2 Sensor Socket
• Ratchet [ Ссылка ]
• Socket Driver
• Torque Wrench [ Ссылка ]
• Brake Parts Cleaner
• Paper Towels [ Ссылка ]
• Rust Penetrant
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Toyota Camry 2002-2006 5th Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
